How To Light A Pilot Light On A Rheem Water Heater. While holding down the pilot gas valve or the red button with one hand, you will use your other hand to quickly light the pilot.while still holding the gas down, light that pilot.with a lack of combustible air, the pilot light of your water heater is likely to go out. Hold the red button down while pressing the piezo ignitor striker, found to the immediate right of the gas knob, repeatedly until the pilot is lit.
Want to say thanks for the video? Turn the gas knob to “pilot,” press and hold it down. If there’s a leak, then igniting a flame can cause an explosion.
Table of Contents
Push Down The Red Button To The Left Of The Gas Knob.
If that’s clear, you can proceed. Sniff around the pilot light area and make sure you don’t smell any gas. This same instruction set should be available as a sticker on your unit.
Use My Amazon Link To Shop.
If you’re going on extended vacations, you should turn off the pilot light. If there’s a leak, then igniting a flame can cause an explosion. Below is a picture of the lighting instructions for your water heater taken from rheem's website.
Make Sure To Follow The Lighting Instructions Carefully And Do Not Skip Any Steps.
Use a flashlight or a headlamp to find the burner inside. Rotate the gas knob on your rheem water heater clockwise until it is in position. Rotate the gas knob of your rheem water heater clockwise until it reaches the “off” position.
It Looks Like You Do In Fact Have To Depress The Knob In Order To Turn It So Avoid Using Force.
Open the door/cover over the pilot light access. Rheem gas furnace pilot light instructions It’s easy to turn your water heater pilot back on.
How To Turn Your Water Heater Pilot Light Back On.
Want to say thanks for the video? On a modern rheem gas water heater, it is very easy to light the pilot light. Push down the red button to the left of the gas knob.